How to Replace the Ignition Coil?
Disconnect the negative terminal on your battery. Locate the ignition coil that needs to be replaced.
Label the cables running into the coil, if there are more than one.
Disconnect each cable leading into the coil.
Tuck the ignition cables to the side. Release the clip on the plug running into the side of the coil.
Unscrew the bolts holding the coil in place using a wrench. Remove the coil from the engine bay.
Compare the new coil to the old one before installing it.
Orient the new coil in the same direction as the old one.
Insert the bolts to hold the coil in place. Connect the plug into the side of the ignition coil.
Plug each ignition cable into the coil using the order written on them.
Reconnect the battery. Start the vehicle to test the new coil.