Easy to Bleed the Brake Fluid
1. Make sure vehicles master cylinder reservoir is full
2. Bleed the system in the following order:
a. Master cylinder (If bleeder equipped)
b. Wheel cylinders and calipers in succession, beginning with the wheel closest to the master cylinder and progressing to the one farthest from it
3. Assemble the brake clutch fluid bleeder tool and seal the drain screw on the bottom of the collection bottle by Teflon tape.
4. Connect the shop air to the waste oil collection bottle, and connect the black cone nipple to the brake bleed valve. Open the ball valve.
5. Open the vehicle’s brake bleeding fitting 1/4-1/2 turn and allow the fluid to flow into the storage jar
6. Fill the master cylinder reservoir back to normal with fresh fluid and proceed to the vehicle’s next brake and perform the same steps as above, until changing the brake oil for all the wheels
7. Check the pressure of the pedal