Feature
●【About 24v 50w cable】From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
●【About 24v 50w cable】The original 40W power to 50W, therefore, the maximum temperature increases from 300-310℃ to 340-350℃
●【About HT-NTC100K wires】304 stainless steel,HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
●【About HT-NTC100K wires】Working temperature: -50°C ~ +350°C,can replace the original K-type thermocouple temperature,very fit for print high-temperature filament
●Before buying, please make sure that this product meets your needs.
[2M]
[1M]
Description
24V 50W Ceramic Cartridge Heater Tube
Produce Description
From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
The original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃
The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Support the customization of different specifications, length, resistance of the heater.
Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).
Product specification
Voltage: 12V/24V
Power: 50W
Heating head size: 6 * 20mm
Heating head material: 304 stainless steel
Line length: 1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Heating temperature: up to 350 degrees
Package included:
3 Pcs
Single-ended heater instructions
1. The effective heating part of the heater must keep dry.
2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.
3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.
4. Electric components should be stored in a dry place.
HT-NTC100K Thermistor Temperature Sensor
Produce Description
Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.