Feature
●Size: Diameter: 4mm/ 0.16" and Tolerance:+0"/-0.0008";Height: 25mm/0.98" and Tolerance:+0.02"/-0.02";Finish Type:Centerless grinding.
●Material: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life.
●Easy to install: This cylindrical locating pin has special on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase.
●Application: Mainly used for metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application
●Notice: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than 4 mm)
Description
1. What is a dowel pin?
Generally divided into dowel Pin,slotted spring pin,clevis pins,taper pin and so on.
It is mainly used for positioning and connect two parts, make your equipment more stable .The Pin fixed in the installation hole by Presspassung.
2. How many materials?
Location pin materials are stainless steel SUS304, SUS316, carbon steel C35, C45, etc., heat treatment and hardening are required under high strength requirements.
Dowel Pin Size
3/64"-3/8" 1.5mm-10mm
Length range:(L)
3/16"-4" 4mm-50mm
Diameter Tolerance:
+0.0008"/-0.0008"
Length Tolerance:+0.02"/-0.02"
Uxcell
Our group comprises factories in Asia that manufacture OEM and aftermarket consumer products.
We believe in FACTORY DIRECT purchases.Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.We perform sourcing, quality control and fulfillment. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy.
- Uxcell is professional fastener manufacturing and sales supplier for more than ten years.
- Mainly providing cylindrical positioning pins, conical pins, spring pins, pin shafts and cotter pins, etc.
- Manufactured in compliance with American standards, ISO, German standards, Japanese standards, etc. Major standards
|
|
|
|
|---|---|---|
InstallThis cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase，In order to maintain the best firm performance, a metal adhesive can be added at the fixed end of the locating pin. |
ConnectionThe pin is one of the unthreaded cylindrical pin fasteners. When connecting, make sure to keep the alignment between the hole positions between the connecting components.We suggest to use fixed positioning jigs and drilling tools for drilling |
NoticeFor a tight fit, your hole should be equal to or slightly smaller than the diameter shown (Diameter + 0.006"/-0") |
