Feature
●【Power Cord Kit with Electrical Tape】4.3FT Long enough length AC power cord allow you can plug it into top mount air switch easily, coming with strain relief clamp, wire nuts, electrical tape and detailed user manual, you can fix it in few minutes.
●【Safe 3-Wire Appliance】This 4.3FT 16AWG flexible power cable with strain relief connectors is suitable for kitchen disposals, which can carry 125V at 16A, 1625 Watts max applications. The insulating electrical tape serves as heat insulation and waterproof sealing to ensure a safe usage.
●【Universal Compatibility】The universal dishwasher part is compatible with Badger, Compact, CoverControlPlus, Essential, Excel, Select, Select Plus, Septic Assist, SupremeSS of InSinkErator garage disposal.
●【Easy to Set Up】Only need 5 steps to install, a detailed user manual is included; Need to attention that the ribbed wire should be connected to white wire and the smooth wire connected to black wire of disposal.
●【Accessories All in One】1 x disposal power cord, 1 x rubber insulating electrical tape, 2 x nuts, 1 x clamp, 1 x user manual; If you have any questions about installation, please contact us and we will tell you the exact method.
Description
|
|
|
|
|
|---|---|---|---|
|
Modularized plug and connector safe and not loosened |
Long lasting use, humid-resistant, high temperature resistant SPT-3 power cord |
Copper wire, low resistance, low heat, can withstand high power, safer to use |
Works for Most Garbage Disposal Brands or Model |
Professional electrical tape is flame retardant and weather resistant, providing your the garbage disposal with safer use, avoiding poor wiring and damp conditions
|
|
|
|
|
|---|---|---|---|
STEP 1Using a screwdriver to take off the terminal cover plate. |
STEP 2Insert the wire through the opening, the ribbed wire should be connected to white wire and the smooth wire connected to black wire of disposal, then use nuts to screw them together and wrap it with the insulating electrical tape. |
STEP 3Fixed ring terminal on the middle ground wire. |
STEP 4Tighten the two screws on the clamps to tighten the clamps until the wires do not slip when pulled hard, placing all wires neatly in the compartment and reattach the terminal cover to finish. |
Package List：
1 x garbage disposal power cord
1 x rubber insulating electrical tape
2 x nuts
1 x clamp
1 x user manual