• NOTE:
• Please install metal screw on the stainless steel filter mesh before use to prevent the filter from floating on the marinade.
• Please be careful not to use hot marinade water, which will damage the machine and hose.
• Please do not use a thick marinade (such as butter), which will block the needle.
• Note: The particle size of the marinade should be smaller than the pinhole to avoid clogging the needle.
• Cleaning and maintenance
• After each use, please clean the pipe with clean water, just like injecting marinade, until the water sprayed by the syringe is no longer cloudy. This is because the marinade will easily corrode the pipe if it stays for a long time.

Pierce the needle into the meat and then press the gun handle to add the marinade.

• The marinade injector doesnt work and no marinade gets sucked into the tube. what should I do?
• 1. Check whether the meat injector is installed properly
• Please kindly check the installation video on the details page.
• 2. Check whether the power adapter and motor are working normally
• First, check whether the indicator on the power adapter is on; If the light is on normally, check whether the motor works (the motor will have a humming sound when it works). If the motor does not work, take off the needle first, and then turn on the power switch to see if it works. It may be the needle blockage caused the motor does not work.
• 3. Check whether the needle is blocked
• If the adapter lights up and the motor works but does not suck water, please put the filter screen in a bof water without exposing the water, take off the needle, and press the handle switch for about half a minute; If there is still no water coming out, please turn off the power switch, press the handle switch while using the mouth to suck a few mouthfuls of water from the outlet until you see water flowing from the outlet, then turn on the power switch to see if it works.

Cleaning & Maintenance:

1. How to extend the service life of marinade injector?

It is recommended to turn off the machine directly after cleaning it with water cycle after each use, you dont need to empty the water in the machine, keep some fresh water in the machine and store the machine.

2. What should I do if I dont use the meat injector for a long time?

After use, clean the machine with fresh water cycle and keep the fresh water in the machine without emptying. When you use it again, just empty the previous water and use new fresh water.