SPECIFICATIONS
Product Name: Compression Mould Die Spring
Die springs are much stiffer than the original springs; making your print bed much more stable while printing, seldom need to re-level the heatbed.
Application:
Die springs are primarily used in die machinery, for Plastic Injection. In addition,because die springs are well suited for high stress applications, they are also suitable for a variety of other applications as well.
They couldnt be easier to install!
1. Unscrew the adjustment knobs from the bottom of your print bed.
2. And replace the original springs with these new ones.
3. Screw the adjustment knobs back into the print bed with these new springs.
4. After installing these and doing four corners and the center until all of them had the same drag on the paperLevel your bed and keep on printing!
Material: Spring Steel
Color: Yellow and blue
Length: 20mm/0.78"
OD: 8mm/0.31"
ID: 4mm/0.15"
Load Type:Light Load
Max compression rate:0.5
Package Content: 20pcsx Compression Mould Die Spring