Feature
●Our dual Heads design allows you to control multiple devices with only one IR output. Works with Xbox one, Apple TV, Many set top boxes, DVD, Blu-Ray and IR repeater systems - Check the technical details below to ensure it will work for you.
●Unlike other older IR emitters found our IR Emitter Extender Cable can handle any IR code format in 38kHz and 56kHz. This means it is designed for todays newer Audio Video equipment
●These are Emitters, Not Receivers. We also sell receivers as well please put this number in the Amazon search bar and they will show up- B07V8BYR96
●Lead is terminated with a 3.5mm mono mini plug, Length of wire: 10 feet that can be separated by gently pulling the heads apart
●We have designed this unit without the annoying human eye visible blink so your not annoyed or distracted every time you push a button on any remote control.
Description
IR Dual Head emitter - 3.5mm Mini Stick on Infrared Red Transmitter Cord Compatible with IR Repeater Extender System Kit, Xbox. Covers IR ranges 38kHz and 56kHz
DUAL IR emitter Extender also know as IR blaster Mini Stick-On Infrared emitters.
DUAL IR emitter Mini Stick-On Infrared emitters. This mini emitters Emits IR signal from a IR repeater or device to Audio and Video devices. They are designed to be installed directly on the ir control window of the device you want to control, or place the ir emitters in front of, above or below on your devices such as a Blu-Ray player so the emitter will flood the area for control. DUAL Head ir emitters can be used as part of an IR system to transmit ir commands to AV equipment that are out of sight, such as in an Audio Video Cabinet or Video Closet.
Compatible with most IR Repeater Extender Kits
Two emitters on a single plug so you can control more devices without a signal loss!
- Dual Frequency output
- Nonvisible to the human eye (blinks only infrared light)
- For use with IR Repeater Connecting Blocks
- Clear adhesive film included on emitter housing for attaching to IR window of controlled component or above or below the units.
Technical information
- 3.5 mm Pin out - Tip is Signal, Ring is Gnd
- Voltage at 1.1 volt
- ATTN: Plugging to the back of your CATV, HD DVR STBs with IR IN port, emitters will not work. These are emitters, NOT RECEIVERS. We also sell receivers as well please put this number in the Amazon search bar and they will show up- B07V8BYR96
X Box One installation and other devices - You can install this IR extension cable with Xbox One in a few simple steps
- Connect your IR extension cable to the IR port on the back of the Xbox One
- Position the emitters near the devices you want to control. On around and under.