Feature

●[Document Support] The usage reference link of HC-SR501 PIR infrared sensor: https://www(DOT)mysensors(DOT)org/build/motion
●[Operating voltage range] DC 4.5-20V
●[Advantages of HC-Sr501] This HC-SR501 PIR sensor is more energy saving and environmental friendly human detector module with high quality, effective and low heating, long service life. These are small adjustable infrared motion detection sensors, which have small helpful potentiometers/pots on board to adjust on-time and sensitivity. They work well and do not need a library to run.
●[Works with Multi Development Board] HC-SR501 micro pir sensor module for raspberry pi, it has jumper breakout for dual-mode operation (as picture shown). Works with any SOC, MCU or can even work stand-alone to build quick-n-dirty motion-activated lights, cameras or w/e.
●[Wide Applications] This human infrared sensor can be used under cabinets, stairs, corridors, garages, bathrooms, outdoor corridors, etc. to control the switch of night lights.


Description

3PCS HC-SR501 Pir Motion IR Sensor

3PCS HC-SR501 Human Body Pyroelectricity Infrared PIR Motion Detector Sensor Module3PCS HC-SR501 Human Body Pyroelectricity Infrared PIR Motion Detector Sensor Module
Applications
  • Security Products
  • Human body sensors toys
  • Human body sensor lighting industrial automation and control, etc
Application scenario

It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, is a high tech products.

Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems

Condition:100% brand new with good quality

Product Type: HC-SR501 Body Sensor Module

  • Operating voltage range: DC 4.5-20V Quiescent Current: <50uA
  • Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
  • Delay time: 0.3-200S(adjustable) the range is (0.xx second to tens of second)
  • Block time: 2.5S(default)
  • Can be made a range(0.xx to tens of seconds
  • Board Dimensions: 32mm*24mm Angle
  • Sensor Angle: <100 ° cone angle Lens
  • Diameter: 23mm(Default)

Package included:

3 X HC-SR501 PIR infrared motion sensor modules

HC-SR501 Pir Infrared IR Sensor Body Motion Module for ArduinoHC-SR501 Pir Infrared IR Sensor Body Motion Module for Arduino

Adjustable Delay Time

With induction blocking time (default setting: 3-4 seconds): After each induction output (high level to low level), the induction module can set a blocking time immediately, and sense in this time period The device does not receive any induction signal. This function can realize the interval work (induction output time and blocking time), and can be applied to interval detection products; at the same time, this function can effectively suppress various interferences generated during load switching.

HC-SR501 Pir Infrared IR Sensor Body Motion Module for Arduino HC-SR501 Pir Infrared IR Sensor Body Motion Module for Arduino

Features

  • 1. Fully automatic induction: When someone enters its sensing range, input high level, and when people leave the sensing range, it will automatically delay and turn off high level. Output low level.
  • 2. Photosensitive control (optional): The module has a reserved position, which can be set for photosensitive control, and does not sense during the day or when the light is strong. Photosensitive control is an optional function, and no photoresistor is installed at the factory. If necessary, please purchase the photoresistor separately and install it yourself.
  • 3. Two trigger modes: L can not be repeated, H can be repeated. It can be selected by jumper, the default is H.
    • A. Non-repeatable trigger mode: After the high level is sensed, the output will automatically change from high to low as soon as the delay time ends.
    • B. Repeatable trigger mode: After the induction output is high, during the delay time, if there is a human body moving within its sensing range, its output will remain high until the person leaves. The delay will be high. The level changes to a low level (the sensing module will automatically extend a delay time period after detecting each activity of the human body, and the time of the last activity is the starting point of the delay time).
  • 4. Micro power consumption: 65 microamps of quiescent current, especially suitable for electrical products powered by dry batteries.

HC-SR501 PIR Motion Sensor and Arduino connectionHC-SR501 PIR Motion Sensor and Arduino connection

Instructions for use

  • 1. After the induction module is powered on, there is an initialization time of about one minute, during which time the module will output 0-3 times at intervals, and enter the standby state after one minute.
  • 2. Try to avoid interference sources such as lights directly on the lens on the surface of the module, so as to avoid introducing interference signals and causing misoperation; try to avoid the use environment The wind will not flow, and the wind will also cause interference to the sensor.
  • 3. The sensing module adopts a dual-element probe. The window of the probe is rectangular. The dual elements (A-element and B-element) are located at both ends of the longer direction. When the human body walks from left to right or from right to left, the infrared spectrum reaches the dual element. There is a difference in the time and distance of the sensor. The larger the difference, the more sensitive the sensor. When the human body walks toward the probe from the front or from top to bottom or from bottom to top, the dual element cannot detect the change in the infrared spectrum distance, no difference Therefore, the sensor is not sensitive or does not work; therefore, when installing the sensor, the direction of the dual element of the probe should be as parallel as possible to the direction where the human body moves the most, so as to ensure that the human body is sensed by the dual element of the probe when it passes by. In order to increase the sensing angle range, this module uses a round lens, which also makes the probe sense on all sides, but the left and right sides are still larger than the upper and lower directions, and the sensitivity is stronger. The installation must still follow the above requirements as much as possible.

LM393 Sound Detection Sensor Module MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32 Small Piezoelectric Piezo buzzer Small Breadborad 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks Double-Sided Protoboard PCB Board GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module
See more details See more details See more details See more details See more details See more details
Product name LM393 Sound Sensor Module - High Sensitivity Microphone Sound Detection Sensor with 3.3-5V Digital Onboard Potentiometer Led Indicator for Ar-duino (Pack of 5) 5PCS 8-Digit 7 Segment MAX7219 Digital Segment Module, Seven Section 8 Bit LED Display Tube for Ar-duino MCU/51/AVR/STM32 Raspberry Pi ESP8266 Nodemcu (Pack of 5) 6PCS Active Buzzer SFM-20B Electric Piezo Alarm Ringer DC3-24V Continuous Beep Sound 95dB High Decibel Siren Buzzers Speaker for Arduino 2PCS 400 Tie Point Breadboards Prototype PCB Board Kit Small Solderless Breadboard for Arduino Proto Shield (Pack of 2 pcs 400 Point Breadboard) 42PCS Solderless Double-Sided Protoboard Universal PCB Board Prototype Kit Electronic Breadboard with 6 Sizes (2x8 3x7 4x6 5x7 6x8 7x9cm) for Arduino DIY Project 5PCS MPU-6050 6DOF Accelerometer Gyro Sensor Module丨GY-521 3-Axis Gyroscope 3-Axis Acceleration丨16 Bit AD Converter Data Output IIC I2C for Arduino
1/4W Metal Film Resistors Assortment Kit HC-SR501 PIR Infrared Sensor Microwave Doppler Radar Motion Detector Sensor RCWL-0516 HC-SR312 PIR Motion Sensor HC-SR505 Mini Infrared PIR Motion Sensor 73 Values Variable Resistor Assortment Kit
See more details See more details See more details See more details See more details See more details
Model 30 Values, individual bags with label for each HC-SR501 RCWL-0516 HC-SR312 HC-SR505 73 Values, individual bags with label for each
Delay time 0.5-200S adjustable 2 seconds
Blocking time 2.5 seconds 2 seconds 2.5 seconds
Detect Range Within 5 meters 5-8 meters 3-5 meters Within 3 meters
Angle Sensor <100 degree ≤100 degree <100 degree
Working voltage DC 4.5-20V 4.0 -28.0 V DC 2.7-12V DC 4.5-20V
Size (L*W*H) 30*25*20mm 36*18*2mm 28*9*9mm 30*10*10mm
Feature Stemedu 600PCS/LOT 1/4W Metal Film Resistor Assortment Kit, 1% Resistors Assorted Set, 10 Ohm-1M Ohm Resistance Pack for DIY Electric Projects, 30 Values Each 20pcs Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems high sensitivity, induction distance, high reliability, induction Angle is large, voltage supply range and other characteristics Low power consumption, small size, easy to install, Internal use of digital signal processing, pit interference strong Small and exquisite appearance, Full-automatic induction, Stable reliability, ultra low voltage operating mode Stemedu 1460 PCS Resistors Assortment Kit 1/4W 1% Metal Film Resistor Pack, 1 ohm - 1M ohm Assorted Resistance Set 73 Values, 20 pcs Each for DIY Electronic Projects, Individual Bag with Tag

Product information