
Smartpen Processor NeoLAB has independently developed and applied an optimized processor for smartpens, including the M1+, M1, and N2 smartpens.	Ncode Sensor The exclusively developed sensors on the Neo Smartpens can steadily recognize Ncode under any level of brightness.	High-Quality Hardware Our pen is not only slim, but the sturdy hardware provides stable recognition of handwriting by different individuals despite their distinct angles and distortions.	Print Ncode Anywhere Ncode doesnt need special printing technology. Print it on paper, transparent film, or even an LCD screen, or print by laser printers that support postscript printing - great for home or office use.


	Neo Smartpen M1	Neo Smartpen M1+	Neo Smartpen N2
Support	Android Kitkat 4.4, BT 2.1/iOS 8.1, BT 4.0	Android Lollipop 5.0 or higher/iOS 8.1 or higher BT 4.0/Window 10	Android Jelly Bean 4.1.2 or higher/iOS 8.1 or higher
Bluetooth	Bluetooth 4.2 (CLASSIC/BLE)	Bluetooth 4.2 (CLASSIC/BLE)	USB 2.0 (Micro USB)/Bluetooth 4.0
Battery	Rechargeable Li-po battery 3.7V/280mAh	Li-po battery 3.7V/280mAh	Li-Polymer/3.7V
Charge Time	90 minutes	90 minutes	120 minutes
Writing Time	6 hours	18 hours	6 hours
Size	Length 149.6mm(excluding pen cap ), Thickness 10.4~10.9mm / 17.4g	149.6mm (except Pentip), Thickness 10.4~10.9mm / 17.6g	Length 156.6mm, Thickness 11.5mm / 22g
Companion App	Neo Studio / PaperTube / Grida Board	Neo Studio / PaperTube / Grida Board	Neo Studio / PaperTube / Grida Board