Feature
●BE SEEN, BE SAFE: If your bike has limited space, this 8-pack underglow LED kit is definitely a good choice. It will make you more noticeable when you ride at night for safety purposes.
●REDUCE BULKINESS: Comes with 4 daisy-chain LED strips, you can extend from them. Don’t need to begin each LED strip from the control box, giving you a cleaner look.
●SAVE TIME: Put 2 x 12.7” strips under the tank and run wires beneath it, extend to the front wheel from there. It may save you time because you may not have to take the tank off.
●BRAKE LIGHT: All LED strip lights will go red as an additional warning signal, when you squeeze the brake, reacting instantly, and go back to the previous setting once you release brakes.
●DARK MODE: Keep the mechanical switch on while remotes off, still have brake features without keeping LED strips on all the time, in case your state has laws about automotive lighting.
[M8r LED kit]
[Extensions with M8 connector]
Description
SMD RGB 5050 LEDs with Gold Bonding Wire
Strips of 60 LEDs per meter, output up to 1,000 lumens per meter
- Brightest among SMD RGB LEDs and give off more light per watt
- Offer a light output 3 times that of the most cost effective 3528 LEDs
- Top quality bonding wire among wires in the high-end package field
- With an electrical conductivity 30% higher than the cost-effective material copper
- Produce 3.55% more light than those encapsulated with copper
Silicon Extrusion Technique for LED Strips
No problem for the rain and wet days
- Extruded silicone tube: Waterproof rating IP68, sealed with caps on both ends, and filled with silicone sealants for covering soldering points
- This type of production technique is the most water resistant, and they work even if you dip the strips into water, not to mentioned the rain and the humidity during wet days.
Optimized Fast Locking Connectors for LED Strips
Withstand the rain and pressure washing water
- Fast locking connectors: Waterproof rating IP67, with a watertight housing made from engineering plastic PBT for the 4-pin connectors, keep liquids and moisture outside
- The material PBT for connectors’ housings is a thermoplastic engineering plastic, which features high strength, fatigue wear, dimensional stability and little creep in hot and wet working environment.
Slim Control Box with an Integrated Switch
About the size of a mount switch for the handle bar
- Some bike owners are concerned about how to hide the control box and the wires of an additional kill switch, particularly if you have a compact bike
- This LED strip kit M8r has a slim control box WITHOUT an additional bunch of wires for a kill switch
- You can simply stick it on a flat surface, or fix it somewhere easy to reach on your bike
Self-Protective Mechanisms
3 Built-in features to ensure reliability
- First of all, you won’t damage anything in case you reverse the connection of the wires for power supply
- Built with a resistor to monitor the current, the circuit cuts off automatically when a short circuit occurs, and goes back to normal after the short circuit is removed
- LED indicator: It provides visual indication for working status ? slow blinking for normal working, fast blinking for short circuit warning, and remains off for reverse connection