2" and 3" random orbital air sander Features:
2" and 3" random orbital air sander specifications:
Whats in the Box:
Kindly reminder:
Before you use the 2" and 3" random orbital air sander, please add 2-3 drops of oil from air quick connector and please allow the tool to run for a few seconds after filling to make sure it works well. (oiler not included in our box)
This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air, where the air hose is connected to the tool when the tool is running.
|
|
|
|
---|---|---|---|
When using a random orbital air sander, the plane is facing the surface to be polished, and the correct grinding posture can make the machine run more smoothly and have a longer life... |
The 2-inches or 3 inches hook and loop sanding pad easy replaced, that is lightweight and suitable for small areas of grinding and polishing |
The speed adjustment knob at the rear can adjust the appropriate speed according to different purposes. The rear vent hole design is more conducive to heat dissipation |
Before use, add 2-3cc #60 pneumatic oil to the air inlet to make the fan blade better lubricated. the cylinder cooling then maintains the torque and delays the life of the machine |
|
|
|
|
---|---|---|---|
Replace sanding pad step oneFind the small hole of the random orbital air sander. If you dont find the hole near the outside, use the PIN to hold the rotating block inside. Rotate it a little to find it, then insert it into the hole with the PIN. |
Replace sanding pad step twoHold the PIN, do not let the PIN slide, rotate the sanding pad in the direction of the arrow until the disk is removed from the angle track mill |
Internal eccentric view for angle orbital air sanderYou can find how is the structure for Internal eccentric view of a random orbital air sander |
Replace sanding pad step threeContinue to withstand the PIN, do not let the PIN slide, according to the direction of the arrow in the picture, installing the new sanding pad to random orbital air sander |