Feature
●Can set high or low level trigger with jumper, to meet the demand of more trigger applications.
●With patch optical isolation, strong drive ability and stable performance, the trigger current is 5mA.
●With Fault Tolerant Design, humanized terminals, even if the control line is broken, the relay will not take any action.
●With green power light, red relay status indicator light, can directly reflect the current module working condition.
●Working voltage: 5V, the max load of interface is AC 250V/10, DC 30V/10A.
[DC24V Red]
Description
Feature:
Module Size: 50*41*18.5mm / 2“×1.6”×0.7“（L* W * H）
With 4 fixed bolt holes, diameter 3.1mm, spacing 44.5*35.5mm
High and low level trigger selection:
Trigger current is 2-4mA,.
1. S1 First channel relay high or low level trigger selection;
2. S2 Second channel relay high or low level trigger selection;
3. com and low in short circuit, the relay is low level trigger, com and high end in short circuit, the relay is high level trigger.
Input Interface:
1. DC+: to connect the power positive
2. DC-: to connect the power negative
3. IN1: 1 way signal trigger end, can set the high or low level control relay
4. IN2: 2 way signal trigger end, can set the high or low level control relay
Output Interface:
1. NO1: First channel relay normally open interface, suspend the relay before pulling, then short connect with COM1
2. COM1: First channel relay common interface
3. NC1: First channel relay normally close interface, short connect the relay with COM1 before pulling, then suspend
4. NO2: Second channel relay normally open relay interface, suspend the relay before pulling, then short connect with COM2
5. COM2: Second channel relay common interface
6. NC2: Second channel relay normally close interface, short connect the relay with COM2 before pulling, then suspend
Package Inlcuded:
1pcs NOYITO 2-Channel Relay Module