Feature
●Product Use: Press the trigger button, the relay pull in and lock, press again, the relay is disconnected, you can also external trigger switch and low-level trigger. For Household appliances control, family lighting control, factory equipment control, for a variety of small current control high-voltage high-power product control.
●Using SCM to do control, stable and reliable performance, strong anti-interference, not false trigger. With high-power regulator to provide adequate and stable voltage, and have enough cooling holes to ensure long-term stable and reliable products work;
●With anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
●Relay load: AC 250V 125V 10A or DC 30V 10A.
●【One-year warranty】On-board touch switch as a product test, test the stability of the product directly; Trigger can also be an external trigger switch, the product is equipped with a good terminal block and lead wire, more convenient to use;
[12V]
Description
Features:
1. Using double-panel design PCB;
2. The use of single-chip control, stable and reliable performance, strong anti-interference, will not trigger by mistake, superior performance than CD4013;
3. With high-power regulator to provide adequate and stable voltage, and have enough cooling holes to ensure long-term stable and reliable products work;
4 with anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
5. Use high-quality relay control load, 250V 10A (AC) and 30V 10A (DC) load can withstand;
6 with touch switch as a product test, direct test product stability;
7. Triggering can also be an external trigger switch, the product is equipped with a good terminal block and lead, more convenient to use;
Electrical parameters:
Power supply voltage: DC5V;
Supply current: more than 100mA;
Load: 250V 10A (AC) or 30V 10A (DC);
Module size: 50.5x21x14mm (LWH)
Spacing of mounting holes: 46x17mm(LW), hole diameter: 3.1mm
Product instructions:
1. According to the voltage version connected to the appropriate DC power supply;
2. According to the diagram to connect the circuit, can not be reversed, although the protection circuit, but can not be reversed for a long time;
3.Product use of regulator (5V no regulator) slightly fever, is a normal phenomenon, the relay has a long working hours normal fever, are normal;
4. Load power To give the relay load left a certain margin, should avoid high-power (2000W or so) and long working the product life will have a certain impact.
Pacakge Included:
1Pcs NOYITO 1-Channel Self-locking Relay Module