Feature

●Open End Dome Head Pop Rivets (Blind Rivets)
●All 304 Stainless Steel Construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance
●Rivet Diameter: 5/32 inch (#5, 0.156 inch)
●Flange Diameter: 5/16 inch (0.3125)
●Drill (Hole) Size: #20 Bit, 5/32" Hole (0.160 - 0.164)

[250 5-3 |  5  & 32   x 3  & 16   Grip (0.126-0.187)]





Description

  • Domed head rivets are used when there is no access to the blind side of the two materials
  • Most common rivet
  • IFI 114 Compliant
  • Used to join two materials together quickly
  • After mandrel breaks off domed head is left exposed
  • Made of corrosion resistant stainless steel

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets. Rivets have a two piece construction; one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use. Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed. Rivet size and grip range is measured in installed length. IFI 114 Compliant.