[Black+Black]
[White+Stainless]
[Black+Stainless]
-Electronic Gauge with Unique High Definition and Contrast Ratio LCD
-Tachometer Ratio Programmable (support W-Terminal connection directly)
-Ohm Signal Input Programmable (Fuel Gauge, Water Temperature & Oil Pressure Gauge)
-Total Hour Meter Programmable
-Reverse polarity protection and anti-fogging performance
|
|
|
---|---|---|
How to install it?Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. - Put the gauge in the hole and screw down. |
Why Dont get RPM signal?Tachometer sometimes cannot get signal by ignition system. So, I suggest Tacho sensor signal. It is more stable. I suggest you can buy a Tacho sensor from Eling Parts. NO. is B07RR8NQ45, B07RN3HJ72. |
Recommend 0-190ohm fuel level sensor- 150mm NO. B075CH3TTR - 175mm NO. B075CFCPBR - 200mm NO. B075CGTT9J - 225mm NO. B075CH4BVR - 250 mm NO. B075CGG47K - 275 mm NO. B075CH425R - 300 mm NO. B075CGSHGH - 330 mm NO. B086GMYNSV - 450 mm NO. B075CHWBSP - 500 mm NO. B075CL5SG5 |
Fixing dimension | 85mm(3-3/8") |
Working Voltage | 12V/24V |
Tachometer RPM Range | 0-19999 RPM |
Hour Meter Range | 0-99999.9 hours |
Water Temp Range | 40-120℃/104-248℉ |
Oil Pressure Range | 0-5Bar 0-75Psi /0-10 bar 0-145 Psi |
Voltmeter | 8-36V DC |
Fuel level Range | 0-100% |
Operation mode | LCD display, stepper motor |
Working temperatures | - 40 to 85°C |
Protection Grade | IP67 |
1. Press the button for 2-3 seconds first, then turn on the power supply.
2. Release the button after seeing “PULSE”; Press the button to set up speed ratio from 0.5 to 327. After adjustment, release button and wait for menu to complete flashing.
3. After setting, release button and wait for menu to complete flashing., then it will save the setting.
4. Please note: If your sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine; If the speed signal takes from W-Terminal, the RPM ratio is equal to the half of the number of poles.
5. Normally, When the engine at idle state, tachometer shows 600-800rpm that means speed ratio is correct. If not, you can turn down or turn up speed ratio to check RPM difference.
-Tachometer, match tacho sensor.
-Water temp meter, match temp sensor. ohm signal refers to manual page 2.
-Oil pressure meter, match pressure sensor. ohm signal refers to manual page 1.
-Fuel level meter, match fuel sensor. ohm signal also refers to manual page 2.
-Voltmeter, dont need match sensor.
- B0757JQP55 (3/8"-18NPT)
- B0757JBPNY (M16X1.5)
- B0757FHBXV (M14X1.5)
- B0757HR7XP (M10X1.0)
- B0757JQP54 (1/4"-18NPT)
- B07FF252NK (NPT-1/4)
- B075NKWS21 (M10X1)
- B075NFHP18 (NPT-1/8)
- B07KVX6GNV (NPT-1/4)
- B075NLKTSB (M10X1)
Multi-functional Gauge | Multi-functional Gauge | Multi-functional Gauge | Multi-functional Gauge | Multi-functional Gauge | Multi-functional Gauge | |
---|---|---|---|---|---|---|
size | 85mm | 52mm | 85mm | 85mm | 85mm | 85mm |
color | white+stainless steel | black+stainless steel | black+black | white+stainless steel | black+stainless steel | black+black |
1x Multi-functional Gauge
1x Multi-plug socket
1x External button
1x Installation Instruction