ETS PV907 S-Video without Audio to RJ45S-Video without Audio to RJ45 from Computer Cable Store. The ETS PV902 S-Video/Stereo Audio Balun adapts Category 5 or better premise wiring for use with Super VHS, Hi-8 and other "Y/C" format, high quality video signals. The PV907 uses the industry standard 4 pin-mini-DIN connector for video, and RCA jacks for the two audio channels. This arrangement compliments the connectors on most high-end consumer and Y/C formation professional video devices. The PV907 is a passive (non-powered) device. It is bi-directional, in the sense that identical baluns are used on transmit and receive ends of the run of UTP. Used in pairs to adapt both end of a run of Category 5 or better cable, the result is clean, transparent video and audio transmitted over distances in excess of 300 meters. S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP; Use for point to point replacement of coax and shielded cables; Rugged plastic cases; Made in USA. 100% QA.; Home Theater; High Resolution Remote Monitors; "Prosumer" Video Equipment; Video Projection Systems; Flat to 60 MHz (video) / 10 Hz to 20kHz (audio); 4 pin minidin (video) / (2) RCA (audio) to RJ45; 50dB (video); 600:600 (audio); 500 V (audio, per channel); 66mm x 66mm x 28mm;