Feature

●【PROFESSIONAL TOOL】MR CARTOOL F118 Brake Fluid Bleeder is a power steering fluid exchanger equipment, used to empty and refill brake fluid in the brake and clutch equipment of cars. Its pulsating brake system is applied to avoid air bubbles generating during the process, fast and effectively.
●【EASY TO USE】The brake fluid exchanger provides 2 pressure modes: Standard Mode (0~2.5bar) & Master Mode (0~3bar). One person operation is simple by helped with the pressure mode. And the built-in pressure gauge is convenient to observe the fluid exchange pressure value.
●【COME WITH 7 ADAPTERS】7 sizes of adapters are included in the brake bleeder tool set. Suitable for most vehicles, including European, American, and Asian models.
●【DUAL POWER SUPPLY】Brake system bleeding tool kit is not only equipped with built-in pressure pump, but supporting a 12V battery power supply &110V/220V power outlet power, allowing brake fluid can be changed in everywhere, essential tool for every garage or repair store.
●【WARRANTY】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues, please can contact us, we will provide you with a solution ASAP.

Description


DUAL WORKING MODES Two kinds of working modes: Standard Mode (0~2 5bar); Master/Fast Mode (0~3bar). After choosing the suitable mode, one button to start the machine working and also support one-button stop working function in case of any emergency during the process.	EASY TO CARRY Humanized design, handle for easy-carry, hook for hanging hose, rear base for setting the refilling bottle.	BUILT-IN PRESSURE PUMP Built-in Pressure Gauge: range: 0~50 PSI/0~3.5kg/cm² Equipped with pressure monitoring function. If pressure fails to be built up or the cylinder draws air, the cylinder will be disconnected, preventing the air from entering brake fluid container.

EQUIPPED WITH 7 TYPES OF ADAPTERS & SUITABLE OF MOST VEHICLES

Adapter #1	Fits for Mercedes-Benz, for BMW, for Volkswagen, for Audi, for Skoda, for Volvo, for Land Rover, for BYD, for Jaguar, for Porsche, for Buick, for Ford, for Citroen, for Chevrolet, for PEUGEOT, for Chery, for Changan, for Changan Mazda, for Great Wall Motor, for FAW Haima Automobile, Roewe, for MG, for Renault, for Geely, for ZHONGHUA, for Pentium, for Lexus, for GAC Trumpchi, for QOROS, etc.
Adapter #2	Fits for JAC, for Hyundai, for Subaru, for Roewe 550, for Renault, for Dongfeng-Yueda Kia Series, for Mitsubishi, for Infiniti, for BAIC BJEV, etc.
Adapter #3	Fits for Buick Business Series
Adapter #5	Fits for Honda, for BYD Series
Adapter #6	Fits for Toyota, for KING LONG School Bus Series
Adapter #8	Fits for Dodge, for Chrysler, for JEEP Series
Adapter #10	Fits for Nissan Series

TWO WAYS OF POWER SUPPLY AND OPERATION INTRODUCTION:

Power Supply:

Support 110V/220V electric supply socket
Support 12V battery power supply

One-person Operation:

This brake bleeding machine is equipped with dual working modes, making it possible to operated only by one person with six operation steps, powerful and easy to use.

PRODUCT DETAILS:

WORKING PARAMETERS:

Power Supply: DC 12V battery

Working Pressure: 0~3 bar

Maximum Flow: 1.2 L/min

Maximum Power: 35W

Noise: ≤70dB

Filling Hose Length: 3.5m/ 11.48 feet

Working Voltage: 220~240V, 50/60Hz; or 110~120V, 50/60Hz

Dimensions: 207 x 240 x 360 mm/8.66 x 10.04 x 14.17 inches

Protection Function: fluid shortage protection, container empty protection

Note:

Please wear goggles and gloves to help minimize the risk of injury from splashing liquids.
Do not allow wetting of the brake fluid exchanger and do not allow operation of this equipment in wet conditions.

PACKAGE INCLUDES:

1 x F118 Main Unit

7 x Adapter

1 x 12W Power Cable

1 x Recycling Bottle

1 x Filling Bottle

1 x 110V Plug

1 x 220V Plug

1 x Voltage Converter Transformer

1 x User Manual

DUAL WORKING MODES

EASY TO CARRY