Smooth Operation
1. Hang the vacuum brake bleeder on the hood. Remove the drain plug at the brake oil pan, insert the bleeder nipple into it.
PS: The black nipple and green plug can be used together or separately.
2. Connect the pneumatic brake bleeder to the air compressor through the 1/4" air quick plug and start to bleed the brake oil. The bottle should be lifted above the brake pump. Working air pressure: 90-100 psi.
3. Bottle holds 340ml at most each time, drain out the waste liquid in time through the oil drain port. Simple and fast. At the same time, you should add fresh fluid into the cylinder.
4. Stop when the discharged brake fluid becomes clear. Repeat the above steps on the other cylinders.
5. Tighten the drain plug again, clean up and put away the used tool for future use.