![WORKING](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Smooth Operation
1. Fill refill bottle half with brake fluid. Open the vehicles brake fluid reservoir. Select a right size plastic adapter(C) to screw on the oil refill bottle bolt, install the inverted bottle onto the mouth of the liquid tank. The threaded port (B) must be immersed in the brake fluid, if not, counterclockwise turn the valve till it does.
2. Open the valve(D) and the liquid begins to drop down into the brake fluid tank horizontally, when the brake fluid level in the reservoir has been sufficient to cover the threaded port, the flow will automatically stop.
3. Insert the vacuum hose into the brake bleeder valve through the black nipple. Unscrew 1/4 of the oil bolts anticlockwise with a wrench. Twist the handle of the brake degassing device. The brake fluild will drain out of the vehicles braking system (Fig. 3).
4. Check fuel tank and add brake fluid in time. Continue to deflate until there is no bubbles in the hose (Figure 4).
5. Tighten the oil bolt and turn off the automatic connector (Figure 5). Remove the connector and check that the bolts are tightened. Repeat above steps on each remaining wheel.