Feature
●Outstanding Power - 13.28ft.lbs max torque, 8.2:1 compression ratio, 3600rpm max speed. Horizontal single cylinder 4-stroke OHV engine 301cc 10hp.
●Shaft Specs - 1" diameter, 3.48" length, 1/4 inch PTO keyway, 3/8 inch - 24 UNF end tapped. Used for log splitter, chipper shredder.
●Fuel - 1.2 gal fuel tank, 87+ octane stabilizer treated unleaded gasoline, 4 hours run time @50% load with full tank. 1.16 quart oil tank.
●Replacement Engine - Suitable for Honda GX270, Briggs & Stratton XR 1450, Kohler CH395 and Yamaha MZ300.
●Safety - Force air cooled, splash lubrication system and low oil shutoff function. Oil and gasoline need to be added for first use.
[173cc]
[301cc]
[212cc]
[420cc Electric Start]
Description
BILT HARD 301cc OHV Gas Engine
Features
- Upgraded engineering and construction for improved lifespan.
- Durable cast iron cylinder withstands wear.
- User-friendly controls for easy starting and operation.
- Low oil sensor shuts down engine when oil reaches a level that is too low for safe operation.
- Full EPA III compliance.
- For use on: cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers.
Specifications
- Maximum Torque: 13.28ft.lbs @2500RPM
- Compression Ratio: 8.2:1
- Bore × Stroke: 3.15 in x 2.36 in
- Speed (max) : 3600 RPM
- Shaft length (in.): 3.48in.
- Shaft Diameter: 1 in.
- PTO Shaft Keyway: 1/4in.
- Mounting pattern: 7.69L x 3.76W-6.12W in.
|
|
|
|
|---|---|---|
Horizontal InstallationThe horizontal shaft is ball-bearing mounted, making this gas engine an ideal replacement for most standard engine configurations. |
End Tapped, 7/16"- 20 UNFThe Counter clockwise Rotating PTO Driveshaft end tapped is 7/16" and is support by reliable Steel Ball Bearings. |
Control the Air VolumeWhen the engine is cold-started, part of the air intake ports should be properly closed to increase the gasoline concentration of the mixed gas entering the cylinder. |
Engine Start Guide
