Attach Sliding Brackets to Tray To assemble your new tray, first make sure you have 16” of clearance from the front edge of your desktop. Then, loosen clamp using the provided Allen wrench.
|
Install to Desktop Next, assemble the arm to the clamp, secure the clamp to the desktop, drill pilot holes through the arm into the desktop, and then mount the arm in place.
|
Adjust the Tray To make adjustments, loosen the knob on the side of arm and adjust the height and tilt angle as desired. Then, tighten the knob to lock it into your desired position.
|
Slide out the Mouse Pad Lastly, slide the mouse pad out from underneath the keyboard tray and add the wrist pad and non-slip pads, placing them on the tray.
|