Feature
●High Quality Sewing Feet From TFBOY
●Hold fabrics in place while leaving a space to allow open decorative stitches such as open weave stitches. Reference marks to increase accuracy.
●Foot can be used to line up and sew edgings such as lace to edges of other fabric.
●Centered blade enhances ability to follow the edge of the fabric.
●Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adaptor), Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines
Description
Edge Joining Foot Stitch in Ditch Foot Edge Stitch Presser Foot
EDGE STITCH IN THE DITCH QUILTING FOOT - For Domestic Sewing Machines Snap on
Universal snap-on foot fits all low shank snap-on sewing machines, including Brother, Babylock, Viking (Husky Series), Euro-pro, Janome, Kenmore, White, Juki, Bernina (Bernette Series), New Home, Necchi, Elna and many more!
WHAT FOOT DO YOU HAVE?
The First thing you need to do is have a look at the photo of the Foot Shanks numbered 1 to 4, if your machine has any of these Brackets then this foot will fit your sewing machine. When ordering a new foot for your Sewing Machine the first thing you need to establish is what type of foot do you need? There are basically four types, Slant Shank (mainly old Singer Sewing Machines), High Shank, Low Shank and Snap On/Clip On. Please see Diagram below showing feet types (Except Bernina, some Pfaff and Some Husqvarna, which have their own unique attachment and therefore need a foot shank adaptor).
Does your machines foot screw on or Snap-on/Clip-On? If it does not use a screw to attach, then it is a Snap-on / Clip-On.
If it screws on it is important to know whether your machine is a low shank, high shank, or slant shank sewing machine. If you are not certain, you can measure using the simple instructions below:
To Measure:
Please make sure that the presser foot it lowered before measuring, measure the distance from the bottom of foot to the centre of the screw-hole that holds the foot onto the presser bar.
Singer slant is for slant needle machine only.
A high shank machine measures approximately 1 1/4" (32mm) from the screw (small red dot on the above diagram) to the bottom of the foot.
A low shank machine measures approximately 3/4" (18mm) from the screw (small red dot on the above diagram) to the bottom of the foot.