Feature
●??1.It can be used for various air conditioning compressors from 4000 BTU window units to 120000 BTU commercial units.Replaces parts number RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410
●??2.The motor start capacitor and PTC thermistor in series, no loose parts or complicated wiring. It only needs to be connected in parallel with the run capacitor.
●??3.The SPP6 Hard Start Capacitor can save aged compressor by increasing the compressor’s starting torque by 500%.
●??4.Used widely in air conditioner start capacitor, air conditioner soft start, ac hard start kit, capacitor for ac, hvac capacitor, hvac hard start kit, etc.
●??5. This is a super capacitor that perfectly replaces goodman airconditioner capacitor, supco and dominant hard start capacitor. Wired with "Piggy-Back" terminals for easy installation on run capacitors.
Description
SPP6 start capacitor use in single-phase AC motor, air conditioning, refrigerator compressor and so on.
- Starting air conditioner or heat pump compressors (both reciprical and scroll type) that need an extra "jolt" of electricity to get started.
- Equipment that needs a hard-start capacitor:heat pump or condensers split-systems that have a(TXV) installed on them.
- Old heat pump or condensers that are mechanically stuck and not operating .
If you have a new or old compressor that isnt starting, try installing this hard-start capacitor before you do anything else.
- The parts inside a compressor might be too physically tight to move, or on systems with a TXV where the refrigerant pressures are higher on start-up, and need an extra "kick" of energy to get started. This hard-start capacitor provides that extra jolt of energy.
- Capacitor is very easy to install (takes about 1 minute) and will remain permanently in the equipment.
How to determine the tonnage of the equipment
Check the model number on the compressor (printed on the nameplate on the side of the compressor)
- 12000BTU=1TON
- 18000BTU=1.5TONS
- 24000BTU=2TONS
- and so on.