Feature

●? 100% SATISFACTION GUARANTEE OR MONEY BACK: Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly.
●? FOAM BRUSH INCLUDED: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the first arrow mark. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team.
●? PREVAL READY BOTTLE: Pre-Measured quantity in the container for convenience. Ready to just add denatured alcohol or similar up the second arrow mark. Mix/Shake well. Install Preval Aerosol as per the manufactures directions and use it just like an Aerosol Spray.
●? GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended.
●? MULTIPACK DISCOUNT: Get discount (SAVE MORE with our starter kit, check out our listings with multipacks)


Description

Best Bundle for you! Starter Kit for Black Laser Ink for Metal Make Your Mark with our Starter Kit for Black Laser Ink! Begin your laser marking journey with this bundle. - HIGH QUALITY RED and BLACK MARK - BLI101 is a general purpose laser marking black ink to create high quality permanent mark on variety of different metals. - This is an exceptionally adaptable product and is recommended for almost any metal. - Quick dry - Best results if marked shortly after application when dry - Extremely easy to wash off after laser marking. - Please inquire if Powder and paste form is required. Direct and easy application just like a paint can, no special training required. - Can cover up to 4000 square inches. DIRECTIONS: Use a clean marking surface, free of oil and grease. Add denatured alcohol as directed. Gently stir the mixture while adding. SHAKE WELL, apply on surface and mark with laser. Remove excess with water and wipe clean. ADD ALCOHOL, FILL UP TO THE INDICATED LINE AND STIR WELL, APPLY WITH THE BRUSH INCLUDED OR PURCHASE A PREVAL PROPELLANT TO CONVERT INTO A SPRAY SYSTEM ( PREVAL SYSTEM IS AVAILABLE INTERNATIONALLY SOLD SEPARATELY)