![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
MT-HD3501 | MT-WHD601 | MT-HD3503 | MT-HD3504 | |
Support Resolution | Full HD 1080p | Full HD 1080p | Full HD 1080p | Full HD 1080p |
Transmission distance | 100m / 328ft | 30m /100ft | 150m /500ft | 150m / 500m |
Support 3D | ? | |||
Can pass through wall | ? | ? | ? | |
Uncompressed transmission | ? | |||
Support local loop out | ? | ? | ||
Support ir extension function | ? | ? | ? | |
Support transmitter to receiver | 1x1 | 1x1 | 1x1 | 1x4 |
Moretop Mini Wireless HDMI Extender Kit(MT-HD3501) allows to transmit and extend HDMI signal up to 328 feet (100 meters) wirelessly. It has strong anti-interference ability by 5G Wireless dual-band signal and supports point-to-point connection. It is a good solution for meeting, conference, home entertainment, commercial display, church, clinics, and multimedia education etc.
Moretop MT-HD3501 wireless hdmi transmitter transmission distance will be varied due to the environment.wall, bricks or glass will shorten the signal cover range or cause significant signal loss. in an open field, this wireless hd sender HDMI wireless signal can up to 100m 328ft(line of sight), if through 1 wall the signal can transmit 10-20m/32ft-65ft
This wireless hdmi extender MT-HD3501 device will work on any video source with HDMI ports.
Only four steps are needed to get it to work. :
Wireless HDMI extender input/output resolution supports 480p,576p,720p,1080p, the receive image is clear and stable, colorful and high sound quality without noise. Strong anti-interference ability by operating at 5GHz frequency and point-to-point connection. Low latency less than 300 ms. Small form factor perfect for home, office, and travel.
Safety Information
There’s a delay/latency time (0.3 seconds or less) due to data compression between wireless transmitter and receiver, Not recommended for real-time applications, such as PC gaming,High Speed Sports
Change Small Screen to Big Screen
Wireless hdmi transmitter and receiver easily convert your 1080p video & audio contents from small screens to big screens wirelessly , improving the audience’s viewing experiences. There is no need to install any drivers or software, or setup Wi-Fi networks, either. you can place your display device anywhere, avoiding the headache of installing a complex and expensive wiring infrastructure in media rooms. No more hassle to connect devices with multiple HDMI cables or to frequently reinstall cabling or to adjust device/display placement.
Moretop hdmi wireless transmitter and receiver MT-HD3501 Use av IR transmitter and receiver, you can control source device at the receiver, support 38 KHZ IR transmission. Plug and Play, don’t need set up anything, don’t need download any driver, just connect this wireless transmitter and receiver !
Compatibility | Support HDMI 1.4 , compatible with HDCP 1.4 |
Maximum resolution | 1080p full HD |
Operation frequency | 5GHz |
Configuration | Point to point |
Transmission range | Up to 100 meters (328 feet) |
Plug and play | Easy installation |
No driver | No driver and no WiFi network needed |
Wireless standards | IEEE802.11 a/b/g/n |
IR frequency rate | 38 KHz |
Power | 5V/2A |
Operating temperature | -5 ℃~+70℃ |
Operating dimension | 5% ~ 90% |
Frequently questions and solutions
Display “Connecting”( The TX and RX are not be connected well)
Display “No signal” (The TX and the RX had connected well ,but the TX is not be connected with source device well then no video input )
Transmission distance is shorter or the screen is not fluent
Only has Picture,No Sound (the audio format was not supported)
Only has Sound,No Picture
IR wireless return function is insensitive
Note :