Feature
●? FAST AND ACCURATE - Dont need to take much time, and you can get accurate results in seconds
●? PRECISE RESULT- Even low-contamination drinking water can be accurately calibrated
●? PROFESSIONAL GRADE- Our test provides 17 parameters, including Lead, Bacteria (E. Coli / Water Contamination), Mercury, Fluoride, Iron, Copper, Sulfate, Zinc, Hydrogen Sulfide, Total chlorine, Nitrite, Nitrate, pH, Total Alkalinity, Hardness, Sodium Chloride, and Manganese. Check the color code at the end of the test to get accurate results
●? WIDELY APPLICATION- Our test provides 17 parameters, whether tap , well or any other source of drinking water, the test kits can be quickly performed to get accurate results
●? INSTANT CHAT SERVICE - A team with over 20 years of experience in the water testing industry is ready to response based on your need
Description
Why is it necessary to test drinking water？
The harm of poor water quality to the human body is mainly caused by the impact on human skin, but also on overall health. The water content in an adult accounts for 65% of the body weight, and the amount of water needed daily is also substantial. Water contains a variety of trace elements required by the human body, so the quality of water has a great impact on the health of the body. As the industry develops, water pollution is becoming more and more serious. Residents who drink unclean water may suffer from infectious diseases such as typhoid fever, cholera, bacillary dysentery, and hepatitis A. Therefore, drinking water testing is becoming increasingly important for residents health.
How to use it?
|
|
|
|
|---|---|---|
|
· Dip a strip into water for 2 seconds and then remove the strip. Carefully shake off any excess water. · Hold the strip horizontally for 30 seconds. |
· Pour 40ml sample water into the vial (maximum water level) and tighten the cap. · Shake the vial up and down to dissolve the powder. · Wait for 48 hours. |
WATER TEST STRIP: Compare pads to the color chart over the next 30 seconds to ensure accurate results (for best results, read in natural daylight). BACTERIA TEST: Compare the color of the water sample with the color code of the bottle, and get the result. |
- TEST FOR 17 PARAMETERS:
- PH MANGANESE ZINC
- HARDNESS TOTAL CHLPRINE FLUORIDE
- HYDROGEN SULFIDE MERCURY SODIUM CHLORIDE
- IRON NITRATE TOTAL ALKALNITY
- COPPER NITRITE BACTERIA
- LEAD SULFATE
The water test kit is easy to use and can be performed easily at home.
For positive results:
Add bleach to the sample, then pour it down the toilet. Thoroughly wash hands. Consider the water unsafe and contact your local health department for bacterial confirmation (count and type) and suggested actions to be taken.
This water test strip can be used to detect levels of certain unwanted contaminants commonly found in drinking water (tap well, ground). It can also be used for testing pools, spas, aquariums, etc.
NOTE:
1. Store in a cool, dry place.
2. Avoid touching or polluting the test area of the strip.
3. Keep wet fingers out of the bottle.
4. Keep the cap on tight between uses.
5. Do not remove the desiccant pouch.