Feature
●?【Gunite Spiked Shoes】 - Spike shoes do a great job of covering your shoes from sticking and removing air bubbles during epoxy application. Precisely positioned around the base, the steel spikes can be kept balanced when walking on other materials such as epoxy/concrete/paint.
●?【Sturdy and Durable】 - The shoe plate material is polypropylene with 13 steel spikes that are 1.2 inch in length. Using nylon lock nut, the nylon ring will deform after locking, filling the gap between the connectors at both ends, so as to play a locking role.
●?【Universal Size】 - Epoxy spike shoe size is 11.8*5.1 inch + 13 corrosion resistant steel spikes composition. The laces that hold the spikes to the bottom of the foot can be adjusted to fit regular shoes, sneakers or work boots.
●?【Easy Assembly】 - Each spike shoe has 13 heavy duty steel corrosion resistant durable spikes. All you need to do is tighten the screws with the included wrench, lace up the shoes and youre ready to go. Easy to install and remove.
●?【Caution】- When you walk in the epoxy shoes, please keep your balance to prevent from tipping over or breaking your foot. If you encounter any problem, you can contact us by email.
Description
1. Put the shoelaces on the spikes in the way of picture 1, install the nails and fix them with nuts.
2. Thread the shoelaces through the connector and connect them together as shown in Figure 2-3.
3. Loosen the shoelaces as much as possible and put them on the work shoes. The heel of the work shoes is close to the heel of the spiked shoes. Adjust the shoelaces to the most stressed position, tighten the spiked shoelaces, and then reverse the shoelaces and tighten them as shown in Figure
4. Try to walk and adapt to the spiked shoes, and then you can start a happy work.
Reminder: when walking in spiked shoes, please keep your balance and be careful of rollover or sprain.
|
|
|
|
|---|---|---|
|
|
|
|
