Installation Notes
1. The seat and carpet must be removed to access the bolt cover, because the access to the bolt is covered by the carpet and the interior of vehicle.
2. Make sure the body correctly before removing mounts. (Suggest: Use a 2" x 4", long 24" wooden block or any other suitable recommended size things between the jack and the body panel to distribute the load so as not to damage body panels). If necessary, support the body in multiple areas.
3. After removing the bolts, the main body must be lifted from the frame. The lifting height depends on the mounts to be replaced.
4.The body is fixed to the frame with long bolts. These bolts pass through holes in the floor and rubber pads. The cushions are sandwiched between the floor, the frame and the lower cushion.