Feature
●【Salinity range】The salinity tester has a measurement range of 0~199.9 ppt and a resolution of 0.1ppt, greater salinity testing range brings you a better experience.
●【Automatic Temperature Compensation】This salinity tester has an ATC function of 0-50°C, which can reduce errors caused by changes in solution temperature.
●【Backlight Design】The salt water pool tester has an LCD backlight display, so you can easily view the measurement results regardless of the light.
●【Easy to use】Just wash the electrode with distilled water and dry it with a paper towel before use, then put the salinity tester in the solution to be tested, and get the test value when the value is stable.
●【Wide Application】The large test range of this salinity meter makes it more widely used, ideal for salinity content analysis in saltwater pools, seawater, aquariums, koi fish ponds, mariculture, etc.
Description
Specification
- Salinity measurement range: 0~199.9ppt
- Salinity Resolution: 0.1ppt
- Salinity Accuracy: ±2%F.S
- Temperature measurement range: -50℃-70℃(-58℉-158℉)
- Resolution: 0.1°C(0.2℉)
- Accuracy: ±1.0°C(±2℉)
- Temperature Compensation: 0°C~50°C
- Battery: 4*1.5V
Digital Salinity Tester
Salt Aquarium Tester
- Easy to use - just dip the pool salt tester in water to the immersion line and wait a few seconds to get the measurement on the display.
- Temperature compensation - reduces errors caused by the change of solution temperature.
- Backlit Design - the salt water pool tester has an LCD backlight display, so you can easily view the measurement results regardless of the light.
- Temperature Range - It has a temperature test range of -50°C-70°C (-58°F-158°F) so you can use it as usual even in cold winter months.
- Wide Application - The large salinity test range makes it more widely used, especially for marine salt content analysis, but also for saltwater ponds, koi ponds, salty aquariums, etc.
Salinity Meter Calibration Steps
1. Immerse the meter in distilled water and activate it for about a few hours.
2. Immerse the meter in the 35ppt calibration solution (25°C) and gently stir to prevent air bubbles around the electrodes.
3. After the reading is stable, use a small screwdriver to turn the calibration trimmer on top of the salinity meter until the display shows 35ppt.
4. Rinse with distilled water after calibration and use it to measure the target solution.
