Feature

●Rreplacement car key fits Cadillac Escalade 2007-2014| GMC Yukon 2007-2014| Chevrolet Tahoe & Suburban 2007-2014| Chevrolet Traverse 2009-2015
●DIY programming is available with provided link. 2010+ vehicles are not on board programmable, please get your key programmed at professional locksmith
●Comes complete with batteries, chips and electronic assembly. Each key fob has been 100% pre-tested to ensure quality& function before sending out
●Perfect fits for OEM OUC60221, 15913427, OUC60270. Please confirm that your vehicle is equipped with original factory remote engine start/electric trunk hold/rear glass. Otherwise, the key will not be able to use these function
●Save more than a half than you would have paid the dealer. Should you have any queries or enquiries please email us


Description

Brand New Replacement Car Key Fobs

A great alternative to going to the dealer for your broken key, get an exact replacement from Montgopest for your original.

Specification

P/N: OUC60221, 15913427, OUC60270

Frequency: 315 Mhz

Battery Type: Coin / Button Cell

Number of Buttons: 6

Following models of vehicle can be self-programmable

2007-2010 Cadillac Escalade

2007-2010 Chevrolet Suburban

2007-2010 Chevrolet Tahoe

2009-2010 Chevrolet Traverse

2007-2010 GMC Yukon

Following models of vehicle require locksmith/dealer for programming

2011-2014 Cadillac Escalade

2011-2014 Chevrolet Suburban

2011-2014 Chevrolet Tahoe

2011-2015 Chevrolet Traverse

2011-2014 GMC Yukon

Note：Vehicles made after 2010 are not on board programmable, please get your key programmed at professional locksmith.（Test your key signal before programming）

Programming Tips (e.g. for 2008 Chevrolet Suburban)

Use this Procedure for Vehicles with Driver Information Center Buttons

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until  PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE  displays

4. Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.

5. To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed.

6. To exit programming mode turn key off and remove key. Test remote(s).