Specification
Item Type: Oil Tester
Material: ABS
Color: Red
Size: Approx. 53 x 83 x 13mm/2.1 x 3.3 x 0.5in
Working Temperature: 15℃-27℃
Test Type: Engine Oil
Battery Type: Button Battery
Battery Model: CR2032
Battery Capacity: 240mAh
Battery Voltage: 3.0V
Purpose: Suitable for Oil Quality Detection
Instructions:
1.Select engine type GAS or DSL(diesel).Turn on key down. Wait for 5 seconds, and then drip oil to the test tank when the green light is flashing on the instrument and the red light is flashing. Finally, press the test key to start the test
2. Add a few drops of lubricating oil to be tested to the sensor of the instrument. Do not miss the test tank.
3.Press the "test" test key and release it quickly. The 10 lights will flash in sequence. The last light indicates the quality of the lubricant.
4.No. 1-7 Any LED flashes green, indicating good oil quality.
No.8 or No.9 led flickers yellow, and the oil quality is average.
No. 10 LED is flashing red slowly. It is recommended to change lubricating oil.
No. 10 LED flashes red rapidly, it is recommended to test the engine.
How to Use
Package List
1 x Detector
2 x Battery
1 x Manual
Note
If the test results show that red LED No. 10 flashes, it usually indicates that the lubricating oil has reached an acceptable lower level. At this time, the lubricating oil needs to be replaced.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.