Feature

●Hole free design: Adhesive Shelf Bracket without nails and screw. Peel off the protective film on the back and stick it on a smooth surface.You dont need any tools to install shelf support pegs, which saves a lot of time.
●Strong capacity: The size of the adhesive sheet is 2.8 * 2.8inch, and the area is 40% larger than that of the ordinary model. Each of shelf support peg can carry not less than 15 pounds of weight, you can use 4pcs or more supports peg to support the same shelf to increase the bearing capacity.
●Easy to install: self adhesive bracket, free-hole, no need tools can be used to finish the installation work quickly.
●Suitable for a variety of cabinets and walls: it can be with metal, glass, wood, marble, ceramic tiles, plastic and other hard and smooth surface firmly bonded.
●Beautiful and generous: made of completely transparent plastic, suitable for various styles of cabinets. When you need to change the design, you can take it off without leaving ugly holes and marks in the cabinet.


Description

Enhance Self Adhesive Support Peg

Material：Made of premium plastic +High strength viscose

Load-bearing: 15 Lb per support peg

Size: Adhesive plan 2.8x2.8 inch(7*7cm), The bonding area is 40% larger than that of the ordinary model.

Package: 12 pcs

Feature: No need nails,no need any other tools,it can be installed in a few seconds. The sticky hook can be removed without leaving any traces, no damage to your decorative wall.

Use steps:

1. Measure and mark the correct installation position

2. Clean the wall

3. Peel off the release paper

4. Stick the bracket in the correct position and pay attention to no air residue

Note:

1.Please determine right the location before installation, avoid secondary installation

2.Please wipe the installation position clean before use, without dust, oil and water

3.If you need to support heavy objects, please use it after 24 hours of installation