Description：
1.It is made of high-quality 6mm stainless steel rod with M4 nylon rod end.
2.Designed for RedCat GEN8, it can effectively improve bumpy steering problem.
3. Replaced the weak link of the original vehicle design.
4.The product is applicable to RedCat GEN8.
5.The 65mm link rod is for replacing the servo repositioning bracket, and 80mm is the length used by the original car.
6.The package includes: link rod *4, plastic rod end *8, of which 65mm is a spare link rod for upgrading the servo bracket.
Feature:
1, This is a set of 4 pcs Steering links with Rod Ends / Brass Hollow Balls for Redcat GEN8.
2, It not only replaces the weakest link in the stock set up but also improve the existing Bump Steer condition significantly. With our "servo relocation mount " to correct the stock steering geometry, it will "totally eliminate" the bump steer for good!
Specification:
Material: Stainless steel
Weight: 80g
Designed specifically for Redcat GEN8 chassis
Replaces the weakest link in the stock set up
Improve the existing Bump Steer condition significantly.
6mm Stainless Steel M4 Links, paired with beefy M4 Rod Ends
It not only replaces the weakest link in the stock set up but also improve the existing Bump Steer condition significantly, it will "totally eliminate" the bump steer for good!
Due to the Beeffy M4 rod end on the Tie Rod in this kit, extended 12mm wheel hex is suggested to have better clearance with the tire.
Material:Stainless steel + nylon
colour:Silver