Idle Air Assist Adapter for K Series K20 K24

Idle Air Assist adapter will help clean up the overall look of any K-series engine by removing the old and unnecessary idle air assist valve from the engine. This valve is typically mounted on the rad inlet or intake manifold. The air assist valve was designed to raise the idle during a cold start up to increase engine warm up speed. However, our testing has proved that this sensor can be removed because a properly functioning IACV (Idle Air Control Valve) does the same job.

-

FITMENT

Compatible Models & Years

• Compatible with Acura RSX (2.0L) 2002 to 2006
• Compatible with Acura TSX (2.4L) 2003 to 2013
• Compatible with Honda Civic Si (2.0L & 2.4L) 2002 to 2015
• Compatible with Honda CR-V (2.0L & 2.4L) 2002 to 2016
• Compatible with Honda Element (2.4L) 2003 to 2011

-

Installation

• Remove the idle air assist valve.
• Remove the hose and plug the intake tube inlet using a 5/16 vacuum rubber cap (sold in local auto parts stores).
• Add thread sealant or PTFE tape onto the adapter thread to prevent coolant leak.

-

Whats in the box:

• One (1) Idle air assist adapter

NOTE: Rubber cap for intake manifold is sold in local auto parts store, usually the cost is 2 to 3 Dollars, you will need 5/16 size cap, Dorman is the company makes them.