Feature
●Brand New 7443 Socket/Base Type LED Load Resistors with 50W 8 Ohm high power Lights Error Free Canceller Capacitor Decoder Wire, Excellent for Heat Dissipation.
●Working Power: 50W 8 ohm(Higher decoding rate than 6 ohm). One LED Load Resistor for One LED Bulb.
●Plug& Play LED Load Resistors Fits 7443 7444 7444NA W21W for Turn Signal Bulb Or LED License Plate Lights to Avoid Hyper Flashing- No Flashing Or Burnt Out Bulb Indications. NOT FOR 7440 LED BULB. Confirm the bulb type before ordering.
●Used for Headlight Bulb, Fog Lamp, Turn Signal Light, Daytime Running Light etc. See The Product Socket Picture And Make A Confirmation.
●Load Resistors Heat Up Like Light Bulbs And Get Really HOT When Working. Mount Them On Metal Surface, NOT Plastic. So Dont Touch By Hand Directly. Amazon Filter System Might Not Be 100% Accurate, So Please Double Check Your Original Bulb Type Before Ordering. And The Bulbs Size Also Need To Be Confirmed. TUINCYN Offers "ONE YEAR" Warranty On Items Damaged During Delivery Or Have A Confirmed Manufacturer Defect. Please Buy with Confidence!
Description
7443 LED Load Resistors
The Socket
- Make sure choose the correct Socket Type of bulb before placing order.
- If they dont light after inserting into the socket, insert oppositely.
- Using LED bulbs for turn signal light, you may need load resistors to prevent LED bulbs from hyper flashing.
Standard 7443 LED Load Resistors
- Fits The Following Type: 7443, 7444NA.
- For standard bulb. Not fit for the CK type bulb!!!
- Please make sure your LED bulb is standard before purchasing. Thank you!
- Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So dont touch by hand directly.
- Socket Type: Standard 7443 (NOT FOR THE CK TYPE!!!)
- Resistance: 8 Ohm
- Wattage: 50W
- Condition: 100% Brand New
Why Do I Need The LED Load Resistor?
- LED Turn Signals Blinking Too Fast.
- LED lighting draws much less power and lasts much longer than standard incandescent lighting. The lower current draw will cause what is known as hyperflashing, where the LED bulb will blink faster than the stock bulb. This can be fixed with a flasher or load resistor.
- One LED load resistor is for one bulb.
P.s: Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So dont touch by hand directly.
8 Ohm is with higher decorder rate than the 6 Ohm resistors.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| DIY LED Load Resistors | 3157 LED load Resistors | 7440 Built-in CANBUS LED Bulb | 194 186 T10 Car Interior Bulb | H1 LED Fog Light Bulb | H10 LED Fog Light Bulb | |
| PRODUCT TYPE | LED load resistors | 3157 LED load Resistors | 7440 T20 W21W 7440NA | 194 168 T10 2825 | H1 | H10 9045 9145 9005 |
| LED TYPE | None | None | CREE Chip | Upgraded 4014 | 3014 CHIP | CSP CHIP |
| USAGE | Solve Hyper Flash , Fix CANBUS Error | Solve Hyper Flash , Fix CANBUS Error | Turn Signal Light, Blinkers, Indicators | Car interior light, Curtesy step Lights, Dome Light | Fog Light, DRL | Fog Light, DRL, Headlight |
| WALT | 50W 8ohm | 50W Per Load Resistor | 66W Per Set | 2.6W Per Bulb | 8W Per Set | 80W Per Set |
| Features | DIY, Fits for all socket type | Plug and Play, Solve CANBUS Problem | Built-in CANBUS, extremely bright | CANBUS free, high power | Bright light with projector | 4-Sides Lighting, no dark spot |
| CANBUS Free | ? | ? | ? | ? | ? | ? |