NEWTRY attaches importance to every detail of the crane remote control, committed to providing customers with high-quality products.
Advanced wireless technology allows the remote control to work efficiently even in tough environments.
The remote control can be widely used in cranes, industrial control, single speed vehicle, etc.
This is a modal window.
Disable LED (Red): When the remote is not activated normally, the system will feedback the status.
Signal LED (Green): When the remote sends a signal, it will prompt the indicator light.
Notice: when both lights are flashing at the same time, it means the battery is in low battery status.
Start LED (Red): When the remote control starts normally, the indicator light will remain bright.
Wiring Diagram: The wiring diagram on the receiver allows you to check it conveniently
Cable: 4.92ft/1.5m cable allows more flexible operation.
12V | Voltage | 12V/24V |
100M/328 Feet | Valid Distance | 100M/328 Feet |
IP65 | Protection Level | IP65 |
430~450 MHz | Frequency | 425-446 MHz |
≤10 dBm | Output Power | ≤10 dBm |
-20~85℃/-4~185℉ | Temperature Range | -40~+85℃/-104~185℉ |
32 bits | Safety Code | 32 bits |
12V | Voltage | 12V |
100M/328 Feet | Valid Distance | 100M/328 Feet |
IP65 | Protection Level | IP65 |
430~450 MHz | Frequency | 425-446 MHz |
≤10 dBm | Output Power | ≤10 dBm |
-20~85℃/-4~185℉ | Temperature Range | -40~+85℃/-104~185℉ |
32 bits | Safety Code | 32 bits |