Feature
●【Easy Operation】This 45-degree Pneumatic mini chamfering machine air tools has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade.
●【Adjustment Chamfer Speed】The portable deburring trimming chamfering tool air grinder can freely adjust the gear speed you need. the air intake size can be adjusted at will. Chamfer size adjustment: Unscrew the screw, rotate to select the scale size, and tighten the screw.
●【Excellent Ability】The pneumatic chamfering machine is equipped with double cutter heads made of tungsten steel, which has strong chamfering ability and can easily trim the corners of the mold.
●【Safe and durable】The mini chamfering tool with safety pressure plate switch use more assured. And 1/4 Inch metal net can prevent the burr and foreign matters from entering.
●【Wide Application】The pneumatic beveling machine can be chamfered in the narrowest and shallowest space, suitable for various angles, such as straight edge chamfering, inner and outer round hole chamfering.
Description
Mini Chamfering Machine Manual Linear Chamfering Tool
-The 1/4 Pneumatic Chamfering Machine has a mini body, is light and convenient, can be chamfered in the narrowest and shallowest space and operated with one hand, fast cutting right and round corners.
-Using a sharp tungsten steel double cutter head, the cutting force is strong, sturdy, and durable .Equipped with metal safety switch and safety buckle. Alloy guide plate can effectively block chamfer waste.
-Used for deburring and chamfering the R side of metal trimming arc corners. Suitable for various angles, such as straight edge straight chamfering, inner and outer round hole chamfering, Irregular chamfering, multilateral chamfering of the keyway.
|
|
|
|
|
|---|---|---|---|
5 Speed DesignFive gears can be freely adjusted to the appropriate intake speed for use |
Chamfer Size AdjustmentOpen the screw, rotate to select the scale size, 0.1-1.5MM adjustable, the maximum measured can be inverted to C1.5MM |
Adjustable Exhaust protExhaust port can be adjusted by 360 degree rotation，exhaust in any direction |
Sharp tungsten steel double cutter headTriangle tungsten steel cutter head, auxiliary bearing, strong and durable |
How to Replace blade? Use a hexagon wrench to loosen the plum screw,remove the baffle plate, remove the blade screw with a ring wrench,remove the old blade,and replace it with a new one.
The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position.
Maintenance Tips
1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.
2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.
3. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter the inside of the machine for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.