●All-In-One Set - Set includes 20 different shaped keys, 1/2" square and 21mm hex sockets, 1 x 90mm extension bar. Used to remove and lock a few series Compatible with BMW wheel nuts, BUT DOES NOT FIT ALL BMW MODELS. When purchasing, please double check that the threads in the comparison product picture are the same as the threads on your cars tires to confirm that they fit your car. ●OPTIMIZATION -- Supplied with a 1/2inch Drive Socket Adaptor or can be used with a 21mm Socket or Spanner. Extension Bar for removing key from the socket and for the removal of locking wheel bolts when the key is not available. ●HIGH-QUALITY -- Well made, high-quality, rustproof. All in one plastic case, convenient to store. ●QUALITY WARRANTY -- 3year warranty provided by BELEY OFFICIAL.24hour email supports guarantee your shopping experience. ●KINDLY NOTE -- To avoid returns and saving your time, please carefully check the shapes & marks of the wheel anti-theft screws needed and compare to the shapes & marks of wheel lock keys pictured before purchase.
Description
Remove Your Wheel Locks with A Wheel Lock Key:
Step 1: Make sure your vehicle is in a regulated parking space. Engage the parking brake for extra safety.
Step 2: Align the key with the nut. Line up the splines on the wheel lock key with the wheel lock on the wheel. This is achieved by placing the wheel lock key on the wheel lock and turning it slowly until the tabs or design lines up. The wheel lock key will drop into place on the wheel lock.
Step 3: Place your lug nut wrench on the wheel lock key. Its a six point hexagonal head and it should be the same size as the wheel nut on your car.
Step 4: Turn the nut wrench counterclockwise. This will loosen the wheel lock, and it may take a lot of force to loosen the wheel lock from the wheel.
Step 5: Manually close the wheel locks. Once the wheel lock is loosened, you should be able to manually close the wheel locks easily. If you are installing the wheel locks again, perform this procedure in reverse.
22pcs Wheel Lock Key Removal Kit
Idear for installing and removing Wheel Lock Lug Nuts Compatible with most BMW vehicles.
High-quality materials
Made of high carbon steel material, high hardness, wear resistance, rust resistance and long service life.
1/2" Square Drive Adapter
The length of the adapter is 1/2". Made of high-quality materials, it is durable and rust-proof.
Simple Operation
Extension bar for removing key from the socket and for the removal of locking wheel bolts even customer has lost the key.
Notice Align the key with the nut and align the splines on the wheel lock key with the wheel lock on the wheel. Do not twist with excessive torque, pay attention to fit!
Kindly Note: The color of the plastic tool case is red or blue and is shipped randomly.