Feature
●The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency.
●The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better.
●It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc.
●The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on.
●The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses.
[50 mm]
[60 mm]
[Shank Plus 220 mm]
[110 mm]
[Kit 40 & 55 & 80 & 100 & 110 & 130 mm]
[160 mm]
[70 mm]
[130mm MAX]
[150mm MAX]
[115 mm]
[55 mm]
[30 mm]
[150 mm]
[45 mm]
[Kit 40 & 65 & 80 & 100 & 125 mm]
[130 mm]
[65 mm]
[115mm MAX]
[Kit 30 & 40 & 65 & 80 & 100 mm]
[Shank Max 300 mm]
[100 mm]
[40 mm]
[100mm MAX]
[110mm MAX]
[35 mm]
[120mm MAX]
[160mm MAX]
[75 mm]
Description
BINOTA-Your good experience is a beacon for us to move forward.
|
|
|
|
|---|---|---|
|
Suitable for hole saw bricks, such as round red bricks, foam bricks and foam bricks. |
Suitable for concrete hole saw, such as concrete, cement. |
Suitable for opening brick walls when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc. |
Note
1, The cross positioning drill is more balanced and stable when working.
2, Opening hole material: Can not be used for marble, pebbles, and to avoid rebar in cement walls.
3, When you open a hole in cement material and the hole opener is larger than 80mm, it is recommended to use SDS MAX handle. Use the positioning drill to drill first, and then install the hole opener to make the hole. When the depth reaches 1CM or more, you can remove the positioning drill and keep the hole opener to continue drilling.
Product parameters
1, Hexagon bar wrench: 1.
2. Positioning drill diameter: 3*8mm.
3. Hole saw depth: 48 mm-1.89 Inches.
4. Hexagon Socket Head Cap Screw: 3*class 12.9.
5. Length of shank: 1* SDS PLUS 300mm-11.81 Inches, 1* SDS MAX 300mm-11.81 Inches.
6. Hole saw diameter: 1*40 mm-1.57 Inches, 1*55 mm-2.17 Inches, 1*80 mm-3.15 Inches, 1*100 mm-3.94 Inches, 1*110 mm- 4.33 Inches, 1*130 mm- 5.12 Inches.
Notice
SDS MAX core bit and SDS-PLUS bit match different electric impact drills.
Shank
Round shank-SDS MAX is matched with round shank five-pit electric impact drill.
Round shank-SDS PLUS is matched with round shank four-pit electric impact drill.
Thread- metric M22.