Feature
●SIGNAL OUTPUT: Standard American Output, 240 ohm - 30 ohm (Empty - Full), Non-Linear Output, 18-21mm Per Step
●MOUNTING METHOD: SAE 5 Hole Mounting Pattern ( NOT equidistant ).
●OPERATING: 12V/24V, -40° F to + 185° F (-40° C to +85° C)
●INCLUDED: Sending Unit (1 pc), NBR Mounting Gasket (1 pc), 10-24 Hex Screws (5 pcs), Installation Instruction (1 pc)
●FOR USE IN: Diesel, Fuel, Gasoline, Water, OEM Replacement
Description
KUS USA SSS Fuel & Water Level Sensor
SSS Fuel & Water Level Sensor are widely used in various fuel, water or chemical tanks. With a simple yet reliable structure, starting from 4 inches, every half inch is a standard length.
Reed Switch Technology
Advantages of reed switch type level sender over thick-film swing arm type level sender:
- Non-contact sensing technology, no wear attenuation
- High repeatability
- Good shock resistance
- Minimal potential mechanical failures
Product Description
240-33 Ohm Standard American Output
The electric liquid level sending units are widely used in marine, on-road, off-road, generator set, and industrial applications. They utilize reed switch and magnetic field technology.
- Standard American 240-30 ohm (Empty - Full)
- Steps: Non-Linear Output, 18-21 mm Per Step
- Operating: 12V/24V, -40°F to +185°F
- Material: SUS Stainless Steel
- Length: 5”-24”
- Mounting: SAE 5 Hole
- IP Range: IP67
- Accessories Includes : NBR Mounting Gasket (1 pc), 10-24 Hex Screws (5 pcs), Installation Instruction (1 pc)
Product Details:
|
|
|
|
|---|---|---|
SAE 5 Hole Pattern MountAlignment: The screw hole pattern is asymmetrical. Theres only one way to properly align the gasket. |
Wire TerminalConnection:
|
Proper Length DeterminationMinimum Clearance: When determining the proper length of the sender, keep in mind a minimum 1" clearance must be maintained between the tank bottom and the float retaining collar. |
