Feature

●NEGATIVE POWER TERMINAL: Use the shortest possible 1.5mm² cable, connected to the negative pole of the battery.
●REMOTE TERMINAL: It must be connected to the remote output of the CD/DVD player using a 0.75mm² (18 AWG) cable.
●POSITIVE POWER TERMINAL: Use a 1.5mm² ( 16 AWG) cable straight from the positive terminal of the battery with fuse or circuit breaker (1A) as close as possible to the battery.
●OUTPUT: Audio signal output. It transmits the signal to the amplifier after passing through the equalizers.
●INPUT: Signal input to be equalized. Connect it to the CD/DVD Players RCA output, using a good quality shielded cable to avoid noise pickup.
●LEVEL: Adjusts the input sensitivity of the BASS EQ, which allows for a perfect match the output signal levels of virtually all models of CD/DVD head units on the market. Even 3V input is possible
●SUBSONIC FILTER (HPF): Variable adjustment from 8Hz to 30Hz, which determines the beginning of the amplifiers operating frequency
●LOW PASS FILTER (LPF):Variable adjustment from 60Hz to 250Hz, which determines the end of the amplifiers operating frequency.


Description

"TARAMPS EQBASS Digital Audio for Control Your Bass Volume, with RCA Output / Input, Perfect Match The Output Signal Levels of virtually al Models of CD/DVD Head Units, Frequency Response to 250HZ. || Description :: Have you ever thought about having all your amp settings at your fingertips? If so, Taramps has something hot for you now! The EQ Bass. Now you can control your bass volume AND all your amplifier settings in one single product, granting you with a full control of your sound system. *This product comes with led monitoring cable.* || TECHNICAL INFORMATION :: * FREQUENCY RESPONSE : 10Hz to 250Hz || * SIGNAL TO NOISE RATIO : >100dB || * POWER SUPPLY VOLTAGE (POWER) : 9V to 16VDC || * WEIGHT : 0.79lb (0.360Kg) || * EAN : 7898556849111 || || ADDITIONAL INFORMATION :: * Rated Consumption (On): 151mA@12.6V || * Maximum Signal Input: 3Vac || * Limiter: 0dB to -27dB || * Boost: +10dB || || NEGATIVE POWER TERMINAL: Use the shortest possible 1.5mm² cable, connected to the negative pole of the battery. || REMOTE TERMINAL: It must be connected to the remote output of the CD/DVD player using a 0.75mm² (18 AWG) cable. || POSITIVE POWER TERMINAL: Use a 1.5mm² ( 16 AWG) cable straight from the positive terminal of the battery with fuse or circuit breaker (1A) as close as possible to the battery. || || OUTPUT: Audio signal output. It transmits the signal to the amplifier after passing through the equalizers. || INPUT: Signal input to be equalized. Connect it to the CD/DVD Players RCA output, using a good-quality shielded cable to avoid noise pickup. "