Feature
●Easy to Use: ZEUSFIRE dent puller kit is Suitable for both green hands and professionals. The dent repair tools are designed simply. Most of the dents can be removed within 30 minutes. The dent removal kit comes with a repair introduction. Dont hesitate to get in touch with us If you have any problems
●Paintless Repair: It is entirely paintless dent removal. The dent puller pulls out the dent of the strong stickiness, and the hot melt can be wholly removed without damaging the paint. The bottom of the bridge puller and dent lifter are made of rubber and will not damage the original paint. Tips: Recommended for cars with original paint, we are not recommended to use the repair kit if your paint gets damaged before you repair the dent
●2 IN 1T-bar Puller: Different from other T-bar pullers in the market, our set comes with 2 different big puller lines, fit with bigger dents. Meanwhile, The remover can be detached into a short T-bar puller, with 50 glue tabs, which can solve most dent problems we meet
●Widely Used: 1 Bridge dent puller, 2 in 1 T-bar Puller, 1 gold dent lifter, 3 different size dent pullers, 1 metal tap down pen, and 1 rubber hammer, come with 50 psc size glue tabs and 4 puller lines that can act on automobiles, motorcycle, refrigerator, door ding, hail damage repair, and other metal surface dents
●Excellent Services: Please read the manual before use. We provide 3 years of quality for the dent removal tool. Whatever questions you have, be sure to get in touch with us for free immediately
[97 PCS]
Description
Dent Puller List:
--1* 2 In 1 T-bar Puller(long and short type)
--1* Bridge Dent Puller and 8* accessory
--1* Gold Dent Lifter
--1* 4.72inch Dent Puller+2* 2.36inch Dent Puller
--1* Metal Tap Down Pen(with 9 heads)
--1* Dent Puller Tools Bag
--1* Hot Melt Glue Gun(100W)+10* Pro Hot Melt Glue Sticks
Accessory List:
- --2* Stainless Steel Grooves
- --2* Short Puller Lines+2* Long Puller Lines
- --50* Glue Tabs
- --1* Rubber Hammer
- --1* Empty Bottle
- --2* Yellow Plastic Shovels
- --3* Pair of White Glove
- --1* Rag--1* Product Instruction
|
|
|
|
|---|---|---|
2-in-1 T shape pullerThe 2 in 1 T bar is made of aluminum, for big dents, you can use the puller lines to assist, for small ones, you can use the small blue glue tabs to repair. In addition, it can be broken into a small T-bar. Meet the different needs. |
Suitable for Various Sizes DentsThere are 54 pcs tabs, with 7 different sizes. Suitable for various size dents, according to the size of the dent be chosen. Come with a 100W hot melt glue gun and 10 hot melt glue sticks. There is no need to purchase another part, enough for most dent can meet. |
Bridge puller and dent lifterMade of high-quality material, durable, and easy to carry. The bottom of them is made of rubber will not damage the original paint. |
Installation method:
1. Make the T shape and the rod firmly connected.
2. Then install the T-shape and the long rod.
3. And then grip the hammer spring through the rod.
4. Rotate and twist the T-bar mouthpiece and the long rod.
Tip: Combine the T bar and the buckle link into a small dent puller.
How to Use the Bridge Dent Puller?
1. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun.
2. Choose a tab and apply hot melt glue on it. There are 8 black tabs for the bridge dent puller, and you can choose it according to the dent size.
3. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod.
4. Use the bridge dent puller to align, then tighten the screw slowly with proper power until the surface of the dent is flatted or sightly bulged. The process should proceed carefully and slowly.
5. Spray 75% rubbing alcohol all over the residual glue, wait for 1-3 minutes. Peel it off or remove it with a plastic shove.
How to Use the Gold Dent Lifter?
1. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun.
2. Choose an appropriate tab and apply hot melt glue to it. 50 tabs can be used.
3. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod.
4. use a dent lifter and adjust its height to repair dents.
How to Remove the Large Dent?
1. Clean up the dent and make sure the cars paint is undamaged.
2. Insert the glue stick into the 100W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun.
3. Choose a tab and apply hot melt glue on it.
4. Put the tab on the dent, hold on and wait for a minute until the hot melt glue is a clod.
5. Use a T-bar dent puller to pull up the dent. Repeat the above steps until the dent pop up.
6. Spray 75% rubbing alcohol all over the residual glue. Wait for 1-3 minutes.
7. Peal it off or remove it with a plastic shovel
