![paintless dent puller dent repair](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
1. Clean the dent surface. Put the glue stick into 100W glue gun and connect the power source and preheat for 3-5 minutes. (Please dont connect the car charger)
2. According to the dent size to choose suitable dent puller glue tabs.
3. Then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
5. After the glue cooling, use the T-bar dent puller, pull the sliding rod backwards to pull up the large dent, or use the bridge dent puller to align and press the puller to pull up the small dent. Repeat the above steps until dents pop up.
6. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with plastic shovel.