Feature

●3L Manual brake fluid bleeder kit features a convenient one person operational design built to handle your tough jobs. This bleeding kit with manual pump allows you to easily pressure fill brake fluid into your brake sytem.
●The included 1L reservior bottle with a hanging hook can be secured to the vehicle and it ensures old brake fluid is removed cleanly. The rubber connector of the bottle can be attached to most bleeder screws.
●The built in pressure gauge allows you to closely monitor the pressure system, and the pressure release valve ensures safe use every time. Max. Pressure : 4 bar / 58 psi.
●The included brake bleeder adapter is compatible with Tesla Model 3 and Y. The adapter will rotate through 360° facilitate the setting up of the brake bleeder.
●The brake bleeder is equiped with a quick release coupling, which makes it possible to use with another bleeder cylinder cap.

[For Model 3 Y]

Description

Model 3 Y Manual Brake Bleeder Kit 3L One Person

DIY Brake fluid change, start to finish, with the BILITOOLS Brake and Clutch fluid bleeder. One of the most popular DIY bleeders you can get.

Feature:

Suitable for Tesla Model 3 and Model Y.
One-man bleeding system requiring no external power source.
Reservoir holds 3 Liters of fluid.
Flush the entire system with one fill without the risk of running the reservoir dry.
Fitted with adapter cap, which is specially designed to allow pressure bleeders to be securely connected to the brake master cylinder reservoir.
1L Brake Fluid Bleed Tank with holding chain, hook and bleeding screw adapter.
Included male mini quick disconnect suitable for a wide variety of adapter cap.

Product Detail

Operation Guide


Step 1: Open the container side cap to fill fresh brake fluid with adequate volume into tho container. Then Refit the cap firmly (do not over tighten).	Step 2: Remove the cap from the vehicles brake reservoir, then fit the brake bleed adapter with the quick connector over the reservoir neck.	Step 3: Pressurize the bleeder to the level recommended in the vehicle service manual. DO NOT exceed 30psi (2bar). Higher pressures may damage your vehicles hydraulic system and could result in serious injury.


Step 4: Determine the correct brake bleeding sequence from your vehicles service manual. Attach bleed tube to bleed valve at the cylinder to be bled, open bleed valve and bleed until fluid runs clear and free of bubbles.	Step 5: When complete, pressing the pressure release valve to release pressure. Remove the cap from the fluid reservoir, taking care to avoid spilling any fluid that remains in the tube.	Step 6: Replace fluid reservoir cap on your vehicle, checking that the fluid level is at the maximum level indicated on the vehicle reservoir. Before driving your vehicle, carefully check for leaks and test for proper brake operation.


	B1A99071	B1A99072	B1A99200	B1A99073	B1G99039
Item Name	3L One Person Brake Fluid Bleeder Kit Compatible with Tesla 3/Y	3L One Person Brake Fluid Bleeder Kit Compatible with Tesla S/X	7-Piece Brake Bleeder Wrench Set	3L Pneumatic Brake Bleeder Kit with Adapters & 1L Refilling Bottle	8L Automatic Transmission Fluid Pump Pneumatic ATF Refill Kit with 15 ATF Adapters
Type	Manual	Manual	Manual	Pneumatic	Pneumatic
Product Type	Brake Fluid Bleeder Kit	Brake Fluid Bleeder Kit	Brake Fluid Bleeder Kit	Brake Fluid Bleeder Kit	ATF Refill Kit
Tank Capacity	3L	3L	/	3L	8L
For Use On	Tesla Model 3/Y	Tesla Model X/S	Universal	Universal	Universal
Application	3L Manual brake fluid bleeder kit features a convenient one person operational design built to handle your tough jobs. This bleeding kit with manual pump allows you to easily pressure fill brake fluid into your brake sytem.	3L Manual brake fluid bleeder kit features a convenient one person operational design built to handle your tough jobs. This bleeding kit with manual pump allows you to easily pressure fill brake fluid into your brake sytem.	For easy bleeding of hydraulic clutch systems and brake systems without removing the wheels.	A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person.	This versatile automative transmission fluid (ATF) extractor and dispenser is designed to extract and dispenser gearbox oil, automatic transmission fluid and final drive oil, by using vacuum generated by workshop compressed air pressure.
Including	1x Hand Pump Brake Bleeder (3L)+1x Brake Fluid Receiver Bottle (1L)+1x Hose+1x Master Cylinder Caps (Elbow Type)+1x Handle Tool+1x Instruction	1x Hand Pump Brake Bleeder (3L)+1x Brake Fluid Receiver Bottle (1L)+1x Hose+1x Master Cylinder Caps (Elbow Type)+1x Handle Tool+1x Instruction	1 x Brake Bleeding Wrench+6 x Socket+1 x Hose	1 x Vacuum Brake Bleeder (3L)+1 x Brake Fluid Refill Bottle (1L)+1 x Silicon Oil Extract Hose (63 inches)+1 x Silicon Bleeding Hose with Rubber Adapter (63 inches)+16 x Bleed Screw Adapters	1 x 8L Transmission Fluid Pump Tank+15 x ATF Filler Adapters+1 x 60 Inch Main Hose with Control Valve and Quick-Connector+1 x 39 Inch Flexible Clear Silicone Hose (?6mm)+2 x 39 Inch Semi-Rigid Nylon Tube (?8mm, ?10mm)+1 x 39 Inch Brake Bleeding Hose

Product Detail

Operation Guide

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

Product information