Operation details:
1. Easy to Bleed the Brake Oil, Wipe the brake master cylinder clean with a shop rag and remove the cap, Put the hose with extension thinner corrosion-resistant tube into the reservoir to extract all the old brake fluid from the master cylinder.
2. Fill the refilling bottle with the new brake fluid, and then fix it on the master cylinder reservoir to add new brake fluid up to the MAX mark. Notice: Keep the reservoir filled all the time to prevent forming a vacuum during the procedure.
3. Clean the bleeder screw to prevent oil or grease from entering and blocking the bleeding tube. Ready your vacuum pump by putting the universal rubber adapter on the brake nipple to connect the bleeder kit with the caliper. Choose the correct line wrench size to turn the bleeder screw open.
4. Connect the bleeder kit to the air compressor. Press the trigger to start bleeding. Keep bleeding until the fluid is coming out clean. Then tighten the bleeder screw, remove the rubber adapter and put the dust cap back on.
What‘s the package include?
1 x 2L Vacuum Brake bleeder.
1 x 1L Refilling Bottle.
1 x Silicon bleeding hose.
1 x Silicon hose with Extension thinner corrosion-resistant tube.
Multiple Adapters interface.