How to Use:
Wiring:
1. Red Wire: Positive (+)
2. White Wire: OUT
3. Yellow Wire: IN
4. Black Wire: Negative (?)
5. Blue Wire: Antenna
Specification:
Item Type: Winch Remote Control Kit
Material: ABS + Metal
Battery Type: Alkaline battery (included)
Battery Capacity: 150mAh
Battery Model: 12V 23A
Frequency: 434MHz
Voltage: 12V
Remote Control Size: Approx. 43 x 100mm/1.7 x 3.9in
Receiver Size: Approx. 43 x 70mm/1.7 x 2.8in
The remote range is up to 50 feet.
The visual indicator shows remote operation.
An additional transmitter that can be used to operate the receiver.
The wireless remote control is only designed for the front self-recovery winch.
We recommend that you operate the winch as follows:
1. Loosen the winch clutch.
2. Pull out the winch wire rope about 1.5 meters.
3. Re-engage the clutch of the winch.
4. Insert the plug of the remote control receiver into the female connector of the electromagnetic control box of the winch. If your wireless remote control is -03 type, you should correctly connect the black ground wire to the negative pole of the battery.
5. Put your receiver somewhere.
6. Keep the receiver antenna straight.
7. Pull out the transmitter antenna and move the transmitter cover down to expose the control buttons.
8. Press the button, you can operate the winch to start, stop, in and out.
(It is strongly recommended to find a professional to install)
Package List:
1 x Remote Control
1 x Receiver
1 x Manual