Installation Instructions
1. Connect female fitting directly to the water source. Please avoid connecting through adapters. Connect male fitting to water hose. Any other adapters should be connected after the regulator.
2. Turn on the water inlet for 1mins to flush regulator. Then turn it off again. Connect hose to water inlet of your recreational vehicle. Turn on water supply. Turn on all RV fixtures(e.g.showers,faucets,etc) to flush air out of the plumbing. Then turn them off.
3. Adjust the screw on top of regulator to desired pressure setting.(note: all RV fixtures should be turned off during adjustment.) Unless you can protect your regulator from freezing, please unplug the regulator when outside temperature is expected to fall below freezing and store it indoors.