Feature

●In the case of film, this is on all four edges, or use the included gates for 35mm and 120.
●The diffuser has the simple job of diffusing the backlight.
●This enables pixl-latr to be used with a wide variety of light sources.
●The horizontal gates hold the film along the edge of the whole strip.
●Four rubber feet are included and should be placed in the corners of pixl-latr.


Description

If youve ever tried to digitise a negative or transparency with a digital camera, youll know that two of the biggest headaches are keeping the film in place and flat and backlighting it in a uniform manner. pixl-latr is a low cost, simple but effective film holder for solving both of these problems when digitising 35mm, 120 (up to 6x12), and 5x4 film formats. Since launching pixl-latr, we have made three key improvements to the design - v1.3 benefits from all of these improvements. The first two improvements are to the frame and diffuser which are now made to tighter tolerances. In addition to these tweaks, we are now including stick-on non-slip feet. These feet provide just enough friction to stop pixl-latr from slipping around on a surface whilst still allowing it to be moved with ease. The feet should be stuck to each of the 4 corners of one side of the diffus Box Contains pixl-latr Film Holder for Digitizing/Scanning - 4x5, 120, 35mm Stand Diffuser Frame Locator Pins Gates