Feature

●Fitment: 2007-2014 200; Dodge Avenger 2007-2012; Caliber 2009-2015;2007-2016 Jeep Compass and so on. You also can use the Amazon finder part check this throttle body will fit you vehicle.7-2014 Chrysler 200 Dodge Avenger 2007-2012 Caliber 2009-2015 Journey 2007-2016 Jeep Compass and so on. You also can use the Amazon finder part check this throttle body will fit you vehicle.
●OEM Replacement Number: 04891735AC 4891735AC 4891735AA 4891735AD 4891735AB 977-025.Please reference your old Electronic Throttle Body to check it.
●Item-condition: Complete Throttle Body Assembly - Includes Throttle Actuator, Idle Air Control and Throttle Position Sensor
●Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear
●We are promise Within 1 year if have any damage will send the replacement. if have any question（Such as electric throttle control actuator fails, cracks, stops working or any other problems,）, please contact with us, we will solve it for you. please dont worry and feel free shopping. thank you.


Description

throttle bodythrottle body

About HOWYAA Throttle Body

  • HOWYAA Electronic Throttle Body Assembly with IAC TPS 100% Brand New In Factory Original Package. Not refurbished or re-manufactured part. The electronic throttle unit opens and closes the throttle blade based on input from various engine control sensors, including the accelerator pedal.
  • Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear.
  • Notice: the item from factory with OEM quality, so the quality can be assured, if the product you received doesnt work, please help feedback.

Install Steps:

  • Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
  • Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.
  • way open by hand and then removing the now slackened cables from the throttle lever.
  • Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.
  • Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate ¼-inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.

Product information